Part Number Hot Search : 
AD85561 BZT52C20 8800V 2SK321 EVKIT C1005JB STA505 RLZ10
Product Description
Full Text Search
 

To Download SG143T883B Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SG143
HIGH-VOLTAGE OPERATIONAL AMPLIFIER
DESCRIPTION
The SG143 is a general-purpose high-voltage operational amplifier featuring operation to 40V and overvoltage protection up to 40V. Increased slew rate, together with higher common-mode and supply rejection, insure improved performance at high supply voltages. Operating characteristics are independent of supply voltage and temperature. These devices are intended for use in high voltage applications where common-mode input ranges, high output voltage swings, and low input currents are required. Also, they are internally compensated and are pin compatible with industry standard operational amplifiers.
FEATURES
* * * * * 4.0V to 40V supply voltage range 37V output voltage swing 24V common-mode voltages Overvoltage protection Output short circuit protection
HIGH RELIABILITY FEATURES-SG143
Available to MIL-STD-883 and DESC SMD LMI level "S" processing available
CIRCUIT SCHEMATIC
4/90 Rev 1.1 5/94
Copyright (c) 1994
1
11861 Western Avenue Garden Grove, CA 92641 (714) 898-8121 FAX: (714) 893-2570
LINFINITY
Microelectronics Inc.
SG143
ABSOLUTE MAXIMUM RATINGS
(Note 1)
Supply Voltage SG143 ............................................................................40V Input Voltage SG143 ............................................................................40V Differential Input Voltage ................................. (V+ + |V -| - 3) V
Note 1. Exceeding these ratings could cause damage to the device.
Output Short Circuit Duration ............................................ 5 sec Operating Junction Temperature Hermetic (T, Y-Package) .............................................. 150C Storage Temperature Range ............................ -65C to 150C Lead Temperature (Soldering, 10 Seconds) ................... 300C
THERMAL DATA
T Package: Thermal Resistance-Junction to Case, JC ................... 25C/W Thermal Resistance-Junction to Ambient, JA ............ 130C/W Y Package: Thermal Resistance-Junction to Case, JC .................. 50C/W Thermal Resistance-Junction to Ambient, JA ........... 130C/W
Note A. Junction Temperature Calculation: TJ = TA + (PD x JA). Note B. The above numbers for JC are maximums for the limiting
thermal resistance of the package in a standard mounting configuration. The JA numbers are meant to be guidelines for the thermal performance of the device/pcboard system. All of the above assume no ambient airflow.
RECOMMENDED OPERATING CONDITIONS (Note 2)
Supply Voltage SG143 ........................................................................... 28V Input Voltage SG143 ........................................................................... 28V Operating Ambient Temperature Range (TJ) SG143 ............................................................ -55C to 125C
Note 2. Range over which the device is functional.
ELECTRICAL CHARACTERISTICS
(Unless otherwise specified, these specifications apply for the operating ambient temperature of 25C and over the recommended supply voltage range. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
Parameter Input Offset Voltage TA = TMIN to TMAX Input Offset Current TA = TMAX TA = TMIN. Input Bias Current Large Signal Voltage Gain
Test Conditions
TA = TMIN to TMAX RL = 100K, V OUT = 10V TA = TMIN to TMAX
Common-Mode Rejection Power Supply Rejection Input Common Mode Range (Peak) Unity Gain Bandwidth Slew Rate RL =5K Supply Current Output Voltage Swing Short Circuit Current
SG143 Min. Typ. Max. 2.0 5.0 6.0 1.0 3.0 4.5 7.0 8.0 20 35 100 180 50 80 110 15 100 24 25 1.0 2.5 4.0 22 20
Units mV mV nA nA nA nA nA V/mV V/mV dB V/V V MHz V/s mA V mA
4/90 Rev 1.1 2/94
Copyright (c) 1994
2
11861 Western Avenue Garden Grove, CA 92841 (714) 898-8121 FAX: (714) 893-2570
LINFINITY
Microelectronics Inc.
SG143
CHARACTERISTIC CURVES
FIGURE 1. POWER BANDWIDTH
FIGURE 2. PEAK OUTPUT VOLTAGE SWING VS. POWER SUPPLY VOLTAGE
FIGURE 3. OPEN-LOOP FREQUENCY RESPONSE
FIGURE 4. OUTPUT SHORT-CIRCUIT CURRENT VS. TEMPERATURE
FIGURE 5. INPUT CURRENT
FIGURE 6. VOLTAGE GAIN
4/90 Rev 1.1 2/94
Copyright (c) 1994
3
11861 Western Avenue Garden Grove, CA 92841 (714) 898-8121 FAX: (714) 893-2570
LINFINITY
Microelectronics Inc.
SG143
CHARACTERISTIC CURVES (continued)
FIGURE 7. SUPPLY CURRENT
FIGURE 8. UNITY GAIN BANDWIDTH
TYPICAL APPLICATIONS
FIGURE 9 - VOLTAGE OFFSET NULL CIRCUIT
FIGURE 10 - DIFFERENTIAL AMPLIFIER WITH 20V COMMON-MODE INPUT VOLTAGE RANGE
FIGURE 11 - LOW-DRIFT SAMPLE AND HOLD
CONNECTION DIAGRAMS & ORDERING INFORMATION
Package
8-PIN METAL CAN T - PACKAGE
(See Notes Below)
Part No. SG143T/883B SG143T/DESC SG143T
Ambient Temperature Range -55C to 125C -55C to 125C -55C to 125C
Connection Diagram
N.C. OFFSET ADJUST INVERTING INPUT NON-INVERTING INPUT
2 3 4 5 8 1 7 6
V+ OUTPUT OFFSET ADJUST
V-
8-PIN CERAMIC DIP Y- PACKAGE
SG143Y/883B SG143Y/DESC SG143Y
-55C to 125C -55C to 125C -55C to 125C
OFFSET ADJUST INVERTING INPUT NON-INVERTING INPUT V-
1 2 3 4
8 7 6 5
N.C. V+ OUTPUT OFFSET ADJUST
Note 1. Contact factory for JAN and DESC product availablity. 2. All packages are viewed from the top. 4/90 Rev 1.1 2/94
Copyright (c) 1994
4
11861 Western Avenue Garden Grove, CA 92841 (714) 898-8121 FAX: (714) 893-2570
LINFINITY
Microelectronics Inc.


▲Up To Search▲   

 
Price & Availability of SG143T883B

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X